NICRALLIUM® TA6V ELI – Grade 23 discs are made of a non-precious, titanium-based, type 5 machining and casting dental alloy for metal-ceramic restorations.. Lire plus
NICRALLIUM® TA6V ELI – Grade 23 discs are made of a non-precious, titanium-based, type 5 machining and casting dental alloy for metal-ceramic restorations. This alloy is used for the manufacture of orthopaedic prostheses.
NICRALLIUM® is a registered trademark of BCS.
Work according to standards with clean and sound instruments. Blasting with 50u alumina using a non-recycled blasting machine is essential. The pressure should be 5 to 7 kg, the part should have a uniform matt appearance. The cleaning can be carried out with a steam jet (5 kg approximately) or 10-minute ultrasound in ethyl acetate or alcohol at 90°. In case of impurities, start again from the scraping phase.
Refer to the technical instructions of the ceramic manufacturer.
Sandblasting of the impression surface with 25 or 50μ alumina.
Polishing: rubber, pumice, paste and polishing cream.
Medical device for dental care reserved for health professionals. Read carefully the instructions in the leaflet or on the label before use. Class IIa (CE1370 mark issued by Bureau Veritas Italy S.p.A). The mention of the notified body Bureau Veritas Italy is not applicable to products for which Bernard Cervos Société (BCS) is not the manufacturer, namely: Zirconia discs and laser wire.
Conformément à la loi du 29 décembre 2011 (dite loi Bertrand), ce site est exclusivement réservé aux professionnels de l’art dentaire (prothésistes dentaires, facultés et établissements de l’enseignement de chirurgie dentaire ou de prothèse dentaire.)
Je certifie être un professionnel de la santé dentaire
